Hastelloy C-276 Ring Type Joint Flanges are forged nickel-molybdenum-chromium alloy flanges made from UNS N10276 / W.Nr. 2.4819 material, typically supplied to ASTM B564 material requirements and ASME B16.5 dimensional standards in pressure classes 150# – 2500#. Ragnar Metals & Tubes manufactures and exports these flanges with RTJ facing options, EN 10204 3.1/3.2 documentation, and third-party inspection on request.
Ragnar Metals & Tubes is a C-276 Ring Type Joint Flange Supplier and manufacturer of Hastelloy C-276 (UNS N10276) ring type joint flanges to ASTM B564 and applicable ASME flange dimensional standards, with common sizes and classes available from stock, subject to current inventory, for export and EPC orders.
A ring type joint (RTJ) flange has a machined groove on its face designed to seat a metal ring gasket, which deforms slightly under bolt load to create a metal-to-metal seal capable of handling extreme pressure and temperature. RTJ facings are typically specified for the most demanding, highest-pressure-class connections — such as wellheads and high-pressure separators — where a soft gasket facing would not reliably seal.
Hastelloy C-276 is a nickel-molybdenum-chromium alloy (UNS N10276) known for a widely proven, broadly corrosion-resistant composition well suited to severe reducing and mixed chemical environments.
UNS Number
Grade
Flange Type
Standard
MTC
Inspection
Origin
Export
| Class | Standard | Typical Facing |
|---|---|---|
| 150 | ASME B16.5 | RF / FF / RTJ |
| 300 | ASME B16.5 | RF / FF / RTJ |
| 600 | ASME B16.5 | RF / RTJ |
| 900 | ASME B16.5 | RF / RTJ |
| 1500 | ASME B16.5 | RF / RTJ |
| 2500 | ASME B16.5 | RF / RTJ |
Not every class/size combination applies to every flange type. Pressure-temperature ratings must be selected against the applicable ASME rating tables and actual design conditions.
Send us your size, class and quantity — we'll come back with pricing and lead time.
The Middle East and Indian sub-continent are home to hundreds of metal suppliers ranging from small trading shops to large ISO-certified manufacturers. International buyers typically evaluate a supplier on quality compliance, production capability, export experience and pricing transparency before placing a bulk order.
Machined ring groove for a metal ring-joint gasket
Metal-to-metal seal suited to extreme pressure and temperature
Commonly specified in the higher ASME B16.5 pressure classes
Used with octagonal or oval ring gaskets per ASME B16.20
Preferred for critical high-pressure well and separator connections
Manufactured from Hastelloy C-276 (UNS N10276) for a widely proven
| Product | Composition | Usage | Standards |
|---|---|---|---|
| Hastelloy C-276 Ring Type Joint Flange – Standard Class | UNS N10276 | General process piping | ASME B16.5 |
| Hastelloy C-276 Ring Type Joint Flange – High Pressure | UNS N10276 | High-pressure / critical service | ASME B16.5 |
| Specification | Details |
|---|---|
| UNS Number | N10276 |
| Grade | C-276 |
| Flange Type | Ring Type Joint Flange |
| Standard | ASTM B564 / ASME B16.5 |
| Werkstoff Number | 2.4819 |
| Pressure Class | 150# – 2500# |
| Facing | RTJ |
| Size (mm) | Size (mm) |
|---|---|
| 15 | 20 |
| 25 | 32 |
| 40 | 50 |
| 65 | 80 |
| 100 | 125 |
| 150 | 200 |
| 250 | 300 |
| 350 | 400 |
| 450 | 500 |
| 600 |
| Element | Composition (%) |
|---|---|
| Nickel (Ni) | Balance |
| Molybdenum (Mo) | 15.0 – 17.0 |
| Chromium (Cr) | 14.5 – 16.5 |
| Iron (Fe) | 4.0 – 7.0 |
| Tungsten (W) | 3.0 – 4.5 |
| Carbon (C) | 0.01 Max |
| Property | Value |
|---|---|
| Tensile Strength | 690 MPa Min (annealed) |
| Yield Strength (0.2%) | 283 MPa Min |
| Elongation | 40% Min |
| Property | Metric | Imperial |
|---|---|---|
| Density | 8.89 g/cm³ | 0.321 lb/in³ |
| Melting Point | 1325 – 1370 °C | 2415 – 2500 °F |
| Value (µΩ·m) | Temperature (°C) | Condition |
|---|---|---|
| 1.24 | 20 | Annealed |
| Standard | Werkstoff Nr. | UNS |
|---|---|---|
| UNS | 2.4819 | N10276 |
| ASTM / ASME | B564 / SB564 | N10276 |
| Common Trade Name | Hastelloy C-276 | N10276 |
Forged Hastelloy C-276 billets are pressed into flange blanks, solution annealing to restore corrosion resistance and mechanical properties, then CNC-machined to the required class, bore and facing.
| Process | Temperature | Medium | Purpose |
|---|---|---|---|
| Solution Annealing | 1120 – 1170°C | Rapid Water Quench | Retain corrosion resistance and ductility |
Not sure of every specification? Send your drawing, BOQ or existing part photo and our team can review the requirement.
1/2" – 24" NB · Forged, RTJ facing
Extreme pressure/temperature connections
Chemical process industry (pulp/paper, chemical manufacturing)
Flue-gas desulfurization and pollution control
Sour-gas oil & gas production
Waste treatment and incineration
Wellhead and Christmas tree connections
High-pressure separators and critical process connections
| Property | Hastelloy C-276 | Hastelloy C-22 |
|---|---|---|
| Alloy Family | Nickel-Molybdenum-Chromium Alloy | Nickel-Chromium-Molybdenum-Tungsten Alloy |
| UNS / Werkstoff | N10276 / 2.4819 | N06022 / 2.4602 |
C-276 is often preferred for the most severe reducing conditions, while C-22 typically performs better in oxidizing media; both remain leading general-purpose corrosion-resistant alloys.
| Size | Price (USD) | Price (INR) |
|---|---|---|
| 1/2" – 2" NB, 150# | $70 – $160 / pc | ₹5,800 – ₹13,300 / pc |
| 4" – 8" NB, 300# | $300 – $950 / pc | ₹24,900 – ₹78,850 / pc |
| 10" – 24" NB, 600# | $1,400 – $6,000 / pc | ₹1,16,000 – ₹4,98,000 / pc |
Indicative only — actual price depends on size, class, quantity and market rates. Request current pricing above.
Common sizes and standard pressure classes may be available from stock, subject to current inventory. Non-standard sizes, higher pressure classes and project-specific inspection requirements are manufactured or sourced against confirmed orders. Contact us for current stock status and lead time.
MOQ: 25 – 100 Kg / pieces depending on grade, size and product form.
Payment: T/T (bank transfer), Letter of Credit (LC at sight or usance), and SWIFT transfer, depending on order value and buyer requirements.
All export orders are packed in seaworthy, fumigated wooden crates with waterproof inner lining, or palletised packing with clear shipping marks and heat-number identification for full traceability.
Container stuffing is supervised and loading photographs are shared on request, along with certificates of origin, mill test certificates and packing lists for smooth customs clearance at destination ports.
Every Hastelloy C-276 Ring Type Joint Flange is checked for chemistry, tensile strength, hardness and dimensions before dispatch. PMI, radiography and third-party inspection (TUV, BV, SGS, Lloyd's) are available on request, with EN 10204 3.1/3.2 certification.
Documents listed are available on request; not every document applies to every order.
NPS / DN size
Pressure class
Quantity
Facing
Pipe schedule / bore
Material / standard requirement
MTC requirement
Third-party inspection requirement
Delivery location
Required delivery date
Don't know all the specifications? Send your drawing, BOQ or existing part photo and our team can review the requirement.
C-276 Ring Type Joint Flange Manufacturer — full mill traceability with every order
C-276 Ring Type Joint Flange Exporter — export documentation and seaworthy packing for every shipment
C-276 Ring Type Joint Flange Stockist — common classes and sizes available from stock, subject to inventory
C-276 Ring Type Joint Flange Distributor — dedicated support for EPC contractors and trading partners
20+ years exporting nickel and specialty alloy flanges
ISO certified quality systems
Hastelloy C-276 sourced and tested to ASTM B564
Mumbai, Delhi, Pune, Chennai, Hyderabad, Bengaluru, Ahmedabad, Rajkot, Coimbatore, Kolkata, Surat, Vadodara
For buyers searching for a C-276 Ring Type Joint Flange in UAE, Ragnar Metals & Tubes is an India-based manufacturer and exporter supplying Hastelloy C-276 Ring Type Joint Flanges to buyers and EPC contractors in the UAE, Saudi Arabia, Qatar, Oman, Kuwait and Bahrain, with export documentation and seaworthy packing for every shipment.
UAE, Saudi Arabia, Qatar, Oman, Kuwait, Bahrain, USA, UK, Germany, South Africa, Australia, Malaysia
ISO 9001:2015
ISO 10002:2018
GST Registration
Udyam Registration
Before placing an order, confirm:
Don't know the exact specification yet? Send your BOQ or drawing and we'll confirm it with you.
Send us your size, class and quantity — we'll come back with pricing and lead time.
Browse: All Flanges
A ring type joint (RTJ) flange has a machined groove on its face designed to seat a metal ring gasket, which deforms slightly under bolt load to create a metal-to-metal seal capable of handling extreme pressure and temperature.
150# – 2500# per ASME B16.5, depending on size and facing.
Yes, EN 10204 3.1 as standard; 3.2 third-party certification on request.
RTJ.
Yes, we regularly export to the UAE, Saudi Arabia, Qatar, Oman, Kuwait and Bahrain.
Yes, through TUV, BV, SGS or Lloyd's before dispatch.
The material is supplied to ASTM B564 (UNS N10276); dimensions follow the applicable ASME flange dimensional standard, including ASME B16.5 and, for larger sizes, ASME B16.47.
Size (NPS/DN), pressure class, facing, quantity, MTC and inspection requirements, and delivery location.
Yes, a sample Material Test Certificate can be shared on request to confirm our documentation format.
A solid metal ring gasket (octagonal or oval cross-section per ASME B16.20) seats into the machined groove and deforms slightly under bolt load to form the seal.
Hastelloy C-276 offers a widely proven, broadly corrosion-resistant composition well suited to severe reducing and mixed chemical environments.
Yes — Hastelloy C-276 Ring Type Joint Flanges in UNS N10276 are exactly what we manufacture and export; share your size, class and quantity and we'll quote directly.
